install aicp 14.0 rom on xiaomi mi 6x

How to Install AICP 14.0 on Xiaomi Mi 6X (Android 9.0 Pie)

Posted on

Install AICP 14.0 Xiaomi Mi 6X – Xiaomi Mi 6X smartphone has been launched in April 2018. The smartphone comes with a 5.99-inch touchscreen display with a resolution of 1080 px by 2160 px at a PPI of 403 px per inch.

The Xiaomi Mi 6X is powered by octa-core (4×2.2GHz + 4×1.8GHz) processors as it comes with 4GB of RAM. The phone packs 64GB of storage. As far as the cameras are involved, the Xiaomi Mi 6X packs a 12-megapixel (f/1.8, 1.25-micron) principal camera and a 20-megapixel (f/1.8, 1.0-micron) secondary camera on the rear and a 20-megapixel front shooter to get selfies. The Xiaomi Mi 6X runs Android 8.1 Oreo and can be powered with a 3010mAh. It steps 158.70 x 75.40 x 7.30 (height x width x thickness) and weighs only 168.00 grams.

In this guide, we will take on how to install  AICP 14.0 on Xiaomi Mi 6X. Well, Xiaomi Mi 6X was announced in April 2018. The phone came out of the box with Android 8.1 Oreo. Now the good news is that you can enjoy Android Pie OS version on your device unofficially by installing AICP 14.0 Custom ROM.

If you have all this, then you are good to try the new AICP on your device. Follow our guide on how to upgrade, but before that. Let’s understand the features of AICP 14.0.

About AICP ROM

AICP also stands for Android ICE Cold Project which is an aftermarket firmware based on Android Open Source Project. The ROM is first developed for the HTC Desire HD device in the year 2012. Since then AICP has evolved into a mature ROM with the BEST community that you can find! Currently, the ROM is based on Lineage OS with some tweaks from AOSP.

AICP has lots more customization options and supports substratum officially (LOS doesn’t support it officially). AICP also comes with Magisk so you don’t need to reflash magisk when you update via OTA.

Requirements

  • This manual is just for Xiaomi Mi 6X. DO NOT follow this manual for every.
  • You Should Have TWRP installed on your own Xiaomi Mi 6X, Guide: Install TWRP on Xiaomi Mi 6X
  • Make certain your device has sufficient charge left onto it so it will not get turned off throughout the process, 50 percent of charge is suggested.
  • Make certain to download all of the necessary files in the downloads section below.
  • Follow the manual carefully and be certain that you don’t skip any steps. Passing up the steps may leave your device unusable.
  • You will lose the original ROM or any CUSTOM ROM if you already installed in your phone. So be sure that you Backup your phone using TWRP before doing this measure using TWRP or CWM or any Custom Recovery.

Before you go down to the guide Xiaomi Mi 6X, then make sure to fulfill the prerequisites.

Unlock Bootloader Xiaomi Mi 6X

In order to set up TWRP and install ROM Xiaomi Mi 6X, then you have to unlock the bootloader. If you’ve already done it, then you can head over straight to the guide below, otherwise, you are able to follow our comprehensive manual to Unlock Bootloader on Xiaomi Devices.

Downloads

How to Install AICP 14.0 ROM on Xiaomi Mi 6X (Android 9.0 Pie)

  1. Already installed TWRP Recovery in your Xiaomi Mi 6X, Guide: Install TWRP on Xiaomi Mi 6X
  2. Copy the AICP 14.0 ROM.zip file along file for your device.
  3. Boot your device right into TWRP Recovery.
  4. Tap on Wipe, then tap again tap on Advanced Wipe.
  5. Select these options: Dalvik /ART Cache, System, Data, and Cache. Make sure Internal Storage is NOT selected.
  6. Then Swipe to Wipeinstall Havoc OS xiaomi mi a1.
  7. Go back to TWRP main menu, then tap the Install choice and pick the AICP 14.0 ROM.zip file which you moved to your device before.
  8. After picking out the .zip file, then enable Swipe to verify Flash onto the bottom of the display to start the custom ROM setup process. Be patient as this may take a while.install Havoc OS xiaomi mi a1 2
  9. Now back to TWRP main menu, tap on Install choice and pick the Gapps
  10. One of the aforementioned action finishes, hit the Back button on screen and then pick Reboot System.

You’re done! Your device have installed AICP 14.0 on Xiaomi Mi 6X (Android 9.0 Pie) and now will reboot with the custom ROM that you flashed. It might take some time to rebuild cache and finish boot since it is the first reboot after the custom flash. Do not panic if it takes a bit longer for the Reboot process to complete.

Also read

Leave a Reply

Your email address will not be published. Required fields are marked *