Enter Recovery Mode on Samsung Galaxy S9+

How to Enter Recovery Mode on Samsung Galaxy S9+

Posted on

Enter Recovery Mode on Samsung Galaxy S9+ – Install twrp recovery Samsung galaxy s9 plus – Samsung Galaxy S9+ smartphone has been launched in March 2018. The phone includes a 6.20-inch touchscreen display with a resolution of 1440 pixels by 2960 pixels at a PPI of 531 pixels per inch. Samsung Galaxy S9+ price in India begins from Rs. 54,800.

The Samsung Galaxy S9+ is powered by 1.7GHz Oct-core processors and it comes with 6GB of RAM. The smartphone packs 64GB of internal storage that may be expanded up to 400GB via a card. As far as the cameras are concerned, the Samsung Galaxy S9+ packs a 12-megapixel main camera on the trunk and a front shooter for selfies.

The Samsung Galaxy S9+ runs Android 8.0 and can be powered by a 3500mAh non-removable battery. It steps 158.10 x 73.80 x 8.50 (height x width x thickness) and weighs only 189.00 grams.

You need to enter and use the recovery mode in your own Samsung Galaxy S9+ however you don’t know how? Or perhaps you just wish to learn more about this committed surroundings that can be accessed and used on your smartphone.

Well, either way, we have got you covered: during the tips available below we will review the recovery mode menu together with the methods that can be used for bringing this mode in your Galaxy S9 Plus.

Enter Recovery Mode on Samsung Galaxy S9+ 1

So, soon, among this step by step guide we will try to specify the recovery mode surroundings, we’ll review the advantages of utilizing recovery mode, we will also discuss the dangers which can be implied, we’ll mention the differences between stock and custom recovery platforms, we will mention the vital pre-requisites that have to be followed prior to using this specific mode and we’ll eventually detail the steps that must be applied so as to complete the reboot process.

Yes, a reboot sequence has to be completed for obtaining retrieval mode on the Samsung Galaxy S9 since this mode can’t be reached through built-in settings. What’s more, it is hidden by default since it cannot run simultaneously with the Android Mode, so, when recovery mode will be operating the Android mode will be disabled.

By default, your own Galaxy S9+ comes packaged with the inventory recovery environment. By means of this mode you are able to initiate only official operations because factory restrictions are included — so, in that case we can only speak about supported procedures like creating a hard reset, clearing application data cache, or manually applying OTAs.

On the flip side, the stock recovery can be replaced with TWRP or CWM recovery, which are custom surroundings. Through a custom recovery image you’ll be able to execute different other operations as you won’t need to manage factory restrictions anymore. In that regard, if you are using a custom recovery platform, note that you can currently decide to gain root access, remove bloatware, insert customized programs from other resources than Google Play, install custom made MODs, ROMs and kernels, overclock or undervolt CPU frequencies and more.

For the time being, one thing is very important for us: both stock and custom recovery img could be entered and used in the same way — using the techniques explained below. Moreover, going into recovery won’t trip Samsung KNOX so you do not have to worry about losing your phone’s warranty or the access to built-in applications — placing your Galaxy S9+ to recovery is an official procedure supported by your OEM.

Enter Recovery Mode on Samsung Galaxy S9+ 2

Additionally, the steps from below are helpful even if your device was already tweaked — going into recovery can be done in precisely the exact same way whether we talk about rooted si, about unlocked bootloaders or about custom ROMs.

Before beginning the steps explained below I recommend you to confirm the power that is left on your handset. Just in case your device runs low on power (for instance, if the power is now lower than 50%) you have to plug in the charger before doing something else — if you do not apply this operation, your Galaxy S9 Plus can get switched off as you try to access recovery mode and then different malfunctions might get caused.

How to Enter Recovery Mode on Samsung Galaxy S9+

Method 1 — use hardware keys

The first way in which you should Attempt to access recovery mode is using these steps:

  1. Switch off your smartphone: press and hold the Power key for several minutes until the closed down operation is completed or press the Power key after and choose ‘power off‘.
  2. Later, press and also hold the Power, Volume Up and Bixby buttons together.
  3. When the Samsung Logo shows up launch each of the buttons.
  4. The ‘No command‘ message must also look; at the point tap on the screen after.
  5. The recovery mode menu should show up on your Samsung Galaxy S9+.
  6. There, utilize Volume rocker keys so as to scroll up and down and Power key to choose your options.
  7. You’re able to return into Android mode by selecting ‘reboot system now‘.

Method 2 — execute a dedicated adb command

This instant alternative means in using a computer, where Android SDK must be set up — so, first of all, take your time and find out (if you haven’t already) how to install Android SDK on your computer: use this manual for your Windows program and this tutorial for MAC OS X / Linux. Also, on the exact same PC your Galaxy S9 Plus drivers have to be flashed you can find the proper drivers by using the Samsung KIES toolkit.

In your phone you need to look at the USB Debugging feature which is located within Developer Options — so, first you may have to visit About Phone and tap on Constructed Number for enabling Developer Options from the first location. Finally, You Need to follow:

  1. On your computer access the Android SDK folder.
  2. With that folder open a command prompt window.
  3. For reaching cmd: press and hold the Shift computer keyboard key and while doing so right-click on any blank space; then choose’open command prompt window here’.
  4. Meanwhile, power on your smartphone and later connect it with your pc through USB cable.
  5. Now, at the cmd window type’adb reboot retrieval’ and press Enter.
  6. The recovery mode menu should be automatically reached in your smartphone.

Method 3 — Use a dedicated applications from Google Play

Mainly, all you have to do would be to install a dedicated program in your phone and use its attributes for reaching the recovery mode menu. For instance you may go to Google Play and get the Quick Boot tool. Prepare the app and run it on your smartphone; next, follow on-screen prompts and reach the desirable mode.

Final thoughts

Hopefully you can now access and use the recovery mode menu onto your Samsung Galaxy S9+. If you’re still having problems while trying to reach recovery mode, do not panic. Just share your issues with us through the comments field from under as based on the info you provide we could bring specific troubleshooting methods in order to assist you as soon as possible. Enjoy and stay close if you would like to learn similar additional Android fundamental operations.

Leave a Reply

Your email address will not be published. Required fields are marked *