how to install aosp extended os xiaomi mi 6

How to Install LineageOS on Xiaomi mi 6 (Android 9.0)

Posted on

Lineage OS on Xiaomi mi 6 – Xiaomi Mi 6 smartphone was launched in April 2017. The phone includes a 5.15-inch touchscreen display with a resolution of 1080×1920 pixels in a pixel density of 428 pixels per inch (ppi) and an aspect ratio of 16:9.

Xiaomi Mi 6 is powered by an octa-core Qualcomm Snapdragon 835 chip that features 4 cores clocked at 2.45GHz and 4 cores clocked at 1.9GHz. It comes with 6GB of RAM. The Xiaomi Mi 6 runs Android and is powered by a 3,350mAh non-removable battery. The Xiaomi Mi 6 supports Quick Charge 3.0 fast charging.

So far as the cameras are involved, the Xiaomi Mi 6 to the rear packs a 12-megapixel primary camera with an f/1.8 aperture along with a pixel dimensions of 1.25-micron plus a second 12-megapixel camera with an f/1.6 aperture along with a pixel dimensions of 2.0-micron. The back camera setup has phase-detection autofocus. It sports a 8-megapixel camera on the front for selfies.

Now, the Android 9.0 Pie version can be set up on the smartphone via the Lineage OS ROM which is a custom ROM that is quite near stock and it is based on AOSP. Speaking about the Android 9.0 Pie update for Android this version has been published by Google and the final stable update continues to be rolled out by Google to the Pixel devices as well as some newer job treble supported phone.lineage os 16.0 xiaomi mi 6

Yet another Android 9.0 Pie available for project trebled devices. The ROM is Named Lineage OS. The current Version is Lineage os. The brand new update added several important features like more network modes support to LTE tile, a One-handed mode in button actions, choice to pick Default GPU renderer, Battery percentage on lock screen and many more.

The ROM in question is one of the best in circulations and one of the hottest: Let us discuss the Lineage os. Thanks to Lineage os ROM, Now You Can enjoy a Google Pixel User Experience on Xiaomi Mi 6. Inside this guide, we are bringing you latest edition of Lineage os ROM for Xiaomi Mi 6 for download.

We would like to thank Cozzmy13, Old Member over Xda for Sharing and Developing the Android 9.0 Pie-based Lineage OS ROM For Xiaomi Mi 6. According to the developer, the ROM is very stable and may be used as a daily driver. Follow the guide to Install Lineage OS Xiaomi Mi 6 (Android 9.0). If you want more information about the ROM, then please see the official Xda thread here.

What is LineageOS

Lineage OS is a custom ROM for Android devices based on the Android Open Source Project. Lineage OS is the job of this wonderful Android community of developers from all around the world. Lineage OS adds lots of new functionalities, features, options, and tweaks on top of this vanilla AOSP Android and which makes the latest Android be available for many Android apparatus which would otherwise not see any kind of update.install lineage os 16.0 xiaomi mi 6

The severe vulnerability of Android (and other) devices to the WiFi KRACK (Key Reinstallation Attack) has been addressed in the Lineage ROM as of 16 October 2017. Many devices, which will not receive a patch for the manufacturers’ stock ROMs, can be safeguarded against KRACK by installing a LineageOS ROM.

What is Android 9.0 Pie

Android 9.0 Pie is the 9th iteration and a major update of Google’s Android OS. The new Android Pie brings a couple of design changes to the successor Android Oreo but the most notable one is the gesture-based navigation system.

Other features of Android 9 Pie are New Quick Settings UI design, Redesigned volume slider, Advanced Battery with AI Support, Notch Support, Improved Adaptive Brightness, Manual theme selection, Android Dashboard which Google calls Digital Wellbeing, and more other features.

Lineage os 16.0 Android 9.0 features

Finally, Google gathered the newest iteration of all Android OS called Android 9.0 Pie. This provides many new features and improvements such as:

  • System-wide Rounded UI
  • OTA support
  • Full OMS support
  • System-wide burn-in protection
  • Spectrum support
  • Micro-G support
  • Signature spoofing
  • Compiled using SDCLANG
  • Razer Phone lock/unlock sounds

Unlock Bootloader Xiaomi Mi 6

In order to set up TWRP and install ROM Xiaomi Mi 6, then you have to unlock the bootloader. If you’ve already done it, then you can head over straight to the guide below, otherwise, you are able to follow our comprehensive manual to Unlock Bootloader on Xiaomi Devices.

Rooting your own Android device, Installing TWRP or even Custom ROM are pretty high level stuff. If you aren’t certain what you’re doing, then it’s most likely not just a great idea to complete it. It’s advised to have a copy of your data before proceeding with such pursuits. The writer of this guide or Neutralday.com will be held responsible should anything happen to a device.

Requirements

  • You Should Have TWRP installed on your own Xiaomi Mi 6.
  • Make certain your device has sufficient charge left onto it so it will not get turned off throughout the process; 50 percent of charge is suggested.
  • Make certain to download all of the necessary files in the downloads section below.
  • Follow the manual carefully and be certain that you don’t skip any steps. Passing up the steps may leave your device unusable.
  • You will lose the original ROM or any CUSTOM ROM if you already installed in your phone. So be sure that you Backup your phone using TWRP before doing this measure using TWRP or CWM or any Custom Recovery.

Follow the guide carefully and be sure that you don’t skip any steps. Passing up the steps will render your device unusable.

Related Post:

Downloads

How to Install Lineage OS on Xiaomi Mi 6

  1. Be sure to have read the ‘Requirements‘ Section obviously.
  2. Download all the required files in the downloads section over.
  3. Copy the Lineage os Zip file along file for your device.
  4. Boot your device right into TWRP Recovery.
  5. Tap on ‘Wipe’, then tap again tap on ‘Advanced Wipe’.
  6. Select these options: Dalvik /ART Cache, System, Data, and Cache, make sure your internal storage is not selected.
  7. Then ‘Swipe to Wipe’.lineage os 16.0 xiaomi Mi 6
  8. Go back to TWRP main menu, then tap the “Install” choice and pick the Lineage os.zip file which you moved to your device before.
  9. After picking out the .zip file, then enable “Swipe to verify Flash” onto the bottom of the display to start the custom ROM setup process. Be patient as this may take a while.lineage os 16.0 xiaomi Mi 6
  10. To flash Gapps, go back to TWRP main menu, then tap the “Install” choice and pick the Gapps.zip file which you moved to your device before.
  11. After picking out the .zip file, then enable “Swipe to verify Flash” onto the bottom of the display to start the custom ROM setup process. Be patient as this may take a while.
  12. One of the aforementioned action finishes, hit the “Back” button on screen and then pick “Reboot System”.

You’re succesfully to install Lineage os 16.0 Xiaomi Mi 6! Your device will now reboot with the custom ROM that you flashed. It might take some time to rebuild cache and finish boot since it is the first reboot after the custom flash. Do not panic if it takes a bit longer for the Reboot process to complete.

Leave a Reply

Your email address will not be published. Required fields are marked *